Interview100x

Interview prep

How to prepare for a TCS software engineer interview

For fresh engineering graduates in India, TCS hires software engineers through the All India NQT: you register on the NextStep portal, apply for the drive, sit a 190-minute in-centre test, and are interviewed if shortlisted12. Your test performance decides whether you are interviewed for a Prime, Digital or Ninja offer, and the interview mainly tests the skill you chose when you registered1. That one registration choice shapes your preparation more than anything else.

Last reviewed November 12, 2026

How the interview process works

TCS's NQT page describes registration and drive application, a two-part integrated test, an interview for the offer category your score qualifies you for, and document verification; freshers who join then attend the Initial Learning Program17.
  1. 1.Registration and Apply for Drive

    Register on NextStep under the IT category (not BPS), choose the skill you want to be evaluated on, select in-centre test mode with three preferred centres, and pick three preferred job cities1. Then click Apply for Drive, which TCS calls mandatory12. Centre allocation depends on availability, and the detailed application form is completed after results1.

  2. 2.NQT Part A: Foundation (75 minutes)

    Numerical, verbal and reasoning ability, 25 minutes each1.

  3. 3.NQT Part B: Advanced (115 minutes)

    Advanced quantitative and reasoning ability (25 minutes) and advanced coding (90 minutes). This part is mandatory if you want to be considered for Prime or Digital1.

  4. 4.Interview

    Your test performance decides whether you are interviewed for Prime, Digital or Ninja. The interview mainly evaluates the skill you selected at registration, plus standard interview questions; TCS does not publish the number of rounds1.

  5. 5.Document verification

    Original academic documents are checked at the interview and again at joining; anyone with work experience also provides employment documents. Ineligible candidates or those with discrepant details are disqualified1.

  6. 6.Initial Learning Program

    Freshers who join attend the in-person ILP, which combines digital courses, hackathons, faculty-led sessions and hands-on work7.

What this is based on

TCS publishes NQT eligibility, test sections and timings, and offer categories for India freshers. It does not publish how many interview rounds there are or what each is called, so this page does not describe separate technical, managerial or HR rounds. Lateral (experienced) hiring runs through the iBegin portal and its interview stages are not described officially6. Drive dates change every year.

Practice questions in the style of this role

Generated by Interview100x's question engine for this role. These are not questions reported from Tata Consultancy Services (TCS).
  1. The posting lists this requirement: hold a B.E, B.Tech, M.E, M.Tech, MCA or M.Sc/M.S from a recognised institution. How do you meet it?
  2. Describe what you'd like to learn in your first year in this role.
  3. Tell me what appeals to you about this team's work.
  4. Walk me through how you would choose between an array and a linked list for a specific program you might write.
  5. Walk me through how a database index helps a query that searches a table by customer ID.
  6. Tell me about a time you were stuck on a hard problem, such as an exam, an assignment or a coding challenge, and kept going.
  7. Why do you want to start your career as a software engineer at TCS, given what you have studied or built?
  8. Explain a technical idea you know well to someone without a technical background.

A worked example

One practice question, a sample answer and what the evaluator said about it.

The question

Walk me through how a database index helps a query that searches a table by customer ID.

Sample answer written for this demo

So without an index, if I run a query like select star from orders where customer ID equals some value, the database has to go through every row in the table and check the customer ID. That is a full table scan, and if the table has millions of rows it is slow. An index is like the index at the back of a book. The database keeps a separate structure, usually a B-tree, where the customer IDs are stored in sorted order with a pointer to where each row is. So when I search for a customer ID, it can go down the tree and find the value quickly, in log n time instead of n. In my final-year project we built a library management system in MySQL, and the search for books by member ID was slow when we loaded test data, so we added an index and it became much faster. I think indexes are very important for performance and we should add them on the columns we search a lot. Also, primary keys get an index automatically.

Interview100x's evaluator output, unedited (fill-in gaps shown in brackets)

Ready

You gave a clear, real example from your final-year project that shows you know a basic database tool and used it to fix a problem. Next, explain how that index works and what it costs, so the interviewer can see you understand the idea and not only the result.

  • What worked: You showed a working use of an index in MySQL: a search was slow, and adding an index made it faster.From the answer: In my final-year project we built a library management system in MySQL, and the search for books by member ID was slow when we loaded test data, so we added an index and it became much faster.
  • Next step: Explain an index as a separate structure that points each value in a column to its matching rows, so the database does not have to look at every row.
  • Next step: Contrast a full table scan, where the database reads every row, with an index lookup, where it jumps straight to the rows it needs.
  • Next step: Walk through the search step by step, from the slow query to the index you added and what changed when it ran.
  • Next step: Practice explaining, in about one minute and out loud, how an index works, what a full table scan is, and one cost of using an index, using your library project as the example.

What the role is evaluated on

Foundation aptitude
Every candidate is tested on numerical, verbal and reasoning ability in Part A1.
Advanced reasoning and coding
Part B tests advanced quantitative and reasoning ability and 90 minutes of advanced coding, and is required for Prime or Digital consideration1.
Depth in your chosen skill
The interview mainly evaluates the technical skill you chose at registration1. Good looks like explaining concepts in that skill, applying them to your own projects and handling a follow-up you did not rehearse.
Fit for the offer level
TCS describes Prime as complex projects, advanced algorithms and system design with automation and security; Digital as solution development, integration and new products; and Ninja as application development, maintenance and systems engineering. It says its focus is on Prime and Digital candidates1.
Eligibility and consistent records
Eligibility is checked at every stage, including 60% aggregate marks, education gaps of no more than 24 months, age 18-28 and at most 2 years of experience13.
Workplace readiness
TCS names Learning and Sharing, Integrity, Respect for the Individual, Excellence and Leading Change as values for new joiners7, and a TCS careers article stresses soft skills, continuous learning and initiative8.

Common ways answers fall short

  • Skipping or rushing Part B

    Candidates who treat the Advanced section as optional rule themselves out of Prime and Digital, which TCS says it requires for those offers1. Plan your preparation for the full 190 minutes.

  • Choosing a skill you cannot defend

    Picking the skill that sounds most impressive at registration backfires, because the interview is anchored on it1. Choose the language or technology you have actually built something with.

  • Missing Apply for Drive

    Registering on NextStep is not enough; TCS says clicking Apply for Drive is mandatory12, and test-centre allocation depends on availability1, so apply early.

  • Document discrepancies

    Marks, dates or gaps that do not match your originals can disqualify you at the interview or at joining1. Check every document against what you entered before the interview day.

  • Memorised definitions with no example

    The interview is anchored on the skill you picked at registration1, so expect follow-ups that move from a definition to your own project code in that same skill. Pair each concept you might be asked about with a line of code or a moment from your project.

  • Falling for recruitment fraud

    TCS says it never charges fees at any stage and does not send hiring messages from free email services such as Gmail or Yahoo145. Treat any such request as fraud.

A prep plan for the time you have

One week

One week: lock your skill and rehearse explaining it

  1. Confirm you meet the eligibility rules and that your entered details match your original documents1.
  2. Write down the skill you selected at registration and list the 15 concepts in it you are most likely to be asked to explain1.
  3. For each concept, prepare a one-minute explanation and one example from your own project.
  4. Take one timed practice of each NQT section under the published timings1.
  5. Run one full voice session of a technical interview on your chosen skill and read where the feedback says your explanations were incomplete.

Suggested pass: Trial Pass, $12One full session shows whether you can explain your chosen skill under follow-up questions; the trial is credited toward Sprint.

Two weeks

Two weeks: test sections plus interview depth

  1. Week 1: do daily timed practice of Part A sections, 25 minutes each, and track accuracy1.
  2. Week 1: practise two 90-minute coding sets to build stamina for Part B1.
  3. Week 2: prepare to walk through your final-year project: the problem, your part, the design and what you would improve.
  4. Week 2: prepare answers on why TCS and how you show learning, integrity and initiative, using the values TCS names78.
  5. Alternate voice sessions between technical questions on your skill and standard interview questions.

Suggested pass: Sprint Pass, $99Sprint gives unlimited practice for this one job until the interview date under fair use, which suits daily short rehearsals.

Four weeks

Four weeks: aim for Digital or Prime

  1. Week 1: take a full 190-minute mock of both NQT parts and find your weakest section1.
  2. Week 2: build depth in your chosen skill beyond definitions, including object-oriented design, data structures and complexity for your language.
  3. Week 2: read TCS's descriptions of Prime and Digital work and prepare one example of system design or integration thinking from your projects1.
  4. Week 3: take a second full mock and compare section scores.
  5. Week 4: run full voice sessions of technical and standard interview questions every other day and track the weakest criterion.
  6. Final days: organise your original documents in the order TCS will check them1.

Suggested pass: Search Pass, $99Fresher hiring season usually means several company drives at once; Search covers practice across multiple jobs, while Sprint suits TCS alone.

Questions candidates ask

How many interview rounds does TCS have for freshers?
TCS does not publish the number of rounds. Its NQT page says the interview mainly evaluates the skill you chose at registration plus standard interview questions1.
What is the difference between TCS Prime, Digital and Ninja?
They are offer categories decided by your test performance. TCS describes Prime as complex projects and advanced technologies, Digital as solution development and new products, and Ninja as application development and maintenance, and says its focus is on Prime and Digital1.
Who is eligible for TCS NQT hiring?
For the 2026 drive, TCS required B.E, B.Tech, M.E, M.Tech, MCA or M.Sc/M.S graduates of the 2024-2026 batches from AICTE or UGC recognised institutions, with 60% aggregate, first class in engineering, no pending backlogs, age 18-28, up to 2 years of experience and education gaps of no more than 24 months1. The drive and eligible batches change each year, so check the current NQT page for your batch1.
Does TCS charge a fee for the NQT or interview?
No. TCS states it never charges candidates at any stage and does not send hiring messages from free email services such as Gmail or Yahoo145.
How do experienced engineers apply to TCS?
Through the TCS iBegin portal. The lateral hiring page lists hiring areas such as AI, Cloud, Cybersecurity and Data and Analytics but does not describe interview stages6.

Practice with an interviewer that follows up

A Trial Pass is one full practice session with feedback on your own answers. It counts toward a Sprint Pass if you continue.

Practice this question now

Sources

  1. 1.TCS All India NQT Hiring (Batch of 2024, 2025 and 2026) · tcs.com · 2026 · accessed 2026-11-12
  2. 2.TCS NQT application form process (PDF) · tcs.com · undated · accessed 2026-11-12
  3. 3.TCS Atlas Hiring 2026 · tcs.com · 2026 · accessed 2026-11-12
  4. 4.TCS B.Sc Ignite Hiring 2026 · tcs.com · 2026 · accessed 2026-11-12
  5. 5.TCS India Entry Level and Internships · tcs.com · undated · accessed 2026-11-12
  6. 6.TCS India Lateral Hiring · tcs.com · undated · accessed 2026-11-12
  7. 7.TCS Initial Learning Program (ILP) · tcs.com · undated · accessed 2026-11-12
  8. 8.Campus to corporate journey (TCS careers article) · tcs.com · undated · accessed 2026-11-12

Interview100x is not affiliated with, endorsed by, or sponsored by Tata Consultancy Services (TCS). Company names are used only to identify the employer. Process details are summarized from Tata Consultancy Services (TCS)'s public pages, linked above; they can change, so check the company's own careers site.

Last reviewed November 12, 2026